HP HPE6-A80 Exam Dumps

A company already has an Aruba wireless network The network currently consists of: * oneMM-HW-1k

*

two 7210 MCs in the network core

*

two 721GMCsintheDMZ

*

200 AP-515S in Building 1 and Building 5

100 AP-515S each In Building 2r Building 3, and Building 4

The customer now wants to assess if it needs local Mobility controllers (MC) for any buildings:

- Building 1 is the main office building for the campus. It supports the highest number of APs. It connects to the network core without an aggregation layer.

*

Building 2 is further away from the Building i. and no roaming is provided between it and the other buildings its access layer connects to the network cone with a pair of Aruba CX 6300M aggregation switches.

*

Building 3 is further away from the other buildings, it connects to the network core without an aggregation layer.

The Guest SSID traffic should be tunnelled to the DMZ controllers

' Building 4 has its own local datacenter and Internet connection. The company would like it to be able to operate completely autonomously if its aggregation layer loses connectivity with the core.

*

Building 5 is further away from the other buildings, it connects to the network core without an aggregation layer.

This building has been assigned to a partner that would like to manage a dedicated SS1D using the shared AP infrastructure.

In which two buildings should the network architect plan local mobility controllers (MCs)? (Select two)

A.

Building 1

B.

Building 4

C.

Building 5

D.

Building 3

E.

Building 2

A customer has an Aruba wireless netwofK with:

*

Two 7205 Mobility Controllers (MCs) in a cluster - Each MC must be able to support the complete network in the case of an MC failure

*

250 APs. which support a total of 7.500 devices

*

A virtual CxQCQ ClearPass appliance with 1QK Access licenses

*

An MM-HW-1K appliance

The customer is interested in an upgrade to Aruba CX Switches, primarily to benefit from the per-user tunneled node feature. The customer requires support for 2500 ports, and 95 percent of wined endpoints will use tunneled node.

Which change to the existing solution should the architect explain?

A.

A separate ClearPass virtual appliance will be required to integrate with the AQS- Switches

B.

The clustering feature will need to be disabled on the controllers, so that they can support tunneled node.

C.

A new controller will be required to support sufficient clients, including the wired ones.

D.

The Mobility Master will need more MM licenses to support the wired endpoints that use tunneled node.

In which scenario do Aruba CX 6400 Series switches, but not Aruba 6300M Series switches, meet the needs Tor a wired upgrade?

A. The customer requires switches in the same closet to operate together as a single switch for Link Aggregation but to be managed as separate devices.

B. The customer requires enhanced redundancy at the access layer and wants to ensure that each switch can continue to operate even if a power supply fails

C. The customer requires each access layer switch to support at least 25Gbps on its fiber uplinks at all times; including if up to one uplink tails.

D. The customer has recently deployed Aruba AP-535 APs and is concerned about a future-proof wired edge that will continue to support expanding bandwidth requirements.