PAS-C01 Online Practice Questions and Answers

A company's basis administrator is planning to deploy SAP on AWS m Linux. The basis administrator must set up the proper storage to store SAP HANAdata and log volumes. Which storage options should the basis administrator choose to meet these requirements? (Select TWO.)

A. Amazon Elastic Block Store (Amazon EBS) Throughput Optimized HDD (st1)

B. Amazon Elastic Block Store (Amazon EBS) Provisioned IOPS SSD (io1, k>2)

C. Amazon S3

D. Amazon Elastic File System (Amazon EFS>

E. Amazon Elastic Block Store (Amazon EBS) General Purpose SSD (gp2 gp3)

An SAP engineer has deployed an SAP S 4HANA system on an Amazon EC2 instance mat runs Linux. The SAP license key has been installed After a white the newly installed SAP instance presents an error that indicates that the SAP license key is not valid because the SAP system's hardware key changed. There have been no changes to the EC2 instance or its configuration.

Which solution will permanently resolve this issue?

A. Perform SAP kernel patching

B. Apply a new SAP license that uses a new hardware key Install the new key

C. Set the SUC_HW_VERSlON Linux environment variable

D. Reboot the EC2 instance

A company wants 10 implement SAP HANAonAWS with the Multi-AZ deployment option by using AWS Launch Wizard for SAP The solution will use SUSE Linux Enterprise High Availability Extension for the high availability deployment An SAP solutions architect must ensure that all the prerequisites are met The SAP solutions architect also must ensure that the user inputs to start the guided deployment of Launch Wizard are valid.

Which combination of steps should the SAP solutions architect take to meet these requirements? (Select TWO)

A. Before starting the Launch Wizard deployment create the underlying Amazon Elastic Block Store (Amazon EBS) volume types to use for SAP HANA data and log volumes based on the performance requirements

B. Use a value for the PaceMakerTag parameter that is not used by any other Amazon EC2 instances in the AWS Region where the system is being deployed

C. Ensure that the virtual hostname for the SAP HANA database that is used for the SUSE Linux Enterprise High Availability Extension configuration is not used in any other deployed accounts

D. Ensure that the Virtual Address parameter is outside the VPC CIDR and is not being used in the route table that is associated with the subnets where primary and secondary SAP HANA instances will be deployed

E. Before starting the Launch Wizard deployment set up the SUSE Linux Enterprise High Availability Extension network configuration and security group

An SAP technology consultant needs to scale up a primary application server (PAS) instance The PAS currently runs on a c5a.xlarge Amazon EC2 instance The SAP technology consultant needs to change the instance type to c5a 2xlarge

How can the SAP technology consultant meet this requirement?

A. Stop the complete SAP system Stop the EC2 instance Use the AWS Management Console or the AWS CLI to change the instance type Start the EC2 instance Start the complete SAP system

B. While SAP is running use the AWS Management Console or the AWS CLI to change the instance type without stopping the EC2 instance

C. Stop the complete SAP system Terminate the EC2 instance Use the AWS Management Console or the AWS CLI to change the instance type Start the EC2 instance Start the complete SAP system

D. While SAP is running, log in to the EC2 instance. Run the following AWS CLI command: aws ec2 modify-instance-attribute --instance-id --instance-type "{\"Value\": \"c5a.2xlargel\"}".

A company is moving to the AWS Cloud gradually. The company has multiple SAP landscapes on VMware The company already has sandbox development and QA systems on AWS The company's production system is still running on

premises. The company has 2 months to cut over the entre landscape to the AWS Cloud The company has adopted a hybrid architecture for the next 2 months and needs to synchronize its shared file systems between the landscapes These shared file systems include trans directory mounts, /software directory mounts, and third-party integration mounts in the on-premises landscape the company has NFS mounts between the servers On the AWS infrastructure side the company is using Amazon Elastic File System (Amazon EFS) to share the common files

An SAP solutions architect needs to design a solution to schedule transfer of these shared files bidirectional^ four times each day. The data transfer must be encrypted Which solution will meet these requirements?

A. Write an rsync script Schedule the script through cron for four times each day in the on- premises VMware servers to transfer the data from on premises to AWS

B. Install an AWS DataSync agent on the on-premises VMware platform Use the DataSync endpoint to synchronize between the on-premises NFS server and Amazon EFS on AWS

C. Order an AWS Snowcone device Use the Snowcone device to transfer data between the on-premises servers and AWS

D. Set up a separate AWS Direct Connect connection for synchronization between the on- premises servers and AWS

A company that has SAP workloads on premises plans to migrate an SAP environment to AWS. The company is new to AWS and has no poor setup. The company has the following requirements

1.

The application server and database server must be placed in isolated network configurations

2.

SAP systems must be accessible to the on-premises end users over the internet

3.

The cost of communications between the application server and the database server must be minimized Which combination of steps should an SAP solutions architect take to meet these requirements? (Select TWO.)

A. Configure a Network Load Balancer for incoming connections from end users

B. Set up an AWS Site-to-Site VPN connection between the company's on-premises network and AWS

C. Separate the application server and the database server by using different VPCs

D. Separate the application server and the database server by using different subnets and network security groups within the same VPC

E. Set up an AWS Direct Connect connection with a private VIF between the company's on-premises network and AWS

A company wants 10 migrate its SAP ERP landscape to AWS The company will use a highly available distributed deployment for the new architecture Clients will access SAP systems from a local data center through an AWS Site-to-Site VPN connection that is already in place An SAP solutions architect needs to design the network access to the SAP production environment

Which configuration approaches will meet these requirements? (Select TWO.)

A. For the ASCS instance configure an overlay IP address that is within the production VPC ClDR range Create an AWS Transit Gateway Attach me VPN to the transit gateway Use the transit gateway to route the communications between the local data center and the production VPC Create a static route on the production VPC to route traffic that is directed to the overlay IP address to the ASCS instance

B. For the ASCS instance configure an overlay IP address that is outside the production VPC ClDR range Create an AWS Transit Gateway Attach the VPN to the transit gateway Use the transit gateway to route the communications between the local data center and the production VPC Create a static route on the production VPC to route traffic that is directed to the overlay IP address to the ASCS instance

C. For the ASCS instance configure an overlay IP address that is within the production VPC ClDR range Create a target group that points to the overlay IP address Create a Network Load Balancer and register the target group Create a static route on the production VPC to route traffic that is directed to the overlay IP address to the ASCS instance

D. For the ASCS instance configure an overlay IP address that is outside the production VPC ClDR range Create a target group that points to the overlay IP address Create a Network Load Balancer, and register the target group Create a static route on the production VPC to route traffic that is directed to the overlay IP address to the ASCS instance

E. For the ASCS instance configure an overlay IP address that is outside the production VPC ClDR range Create a target group that points to the overlay IP address Create an Application Load Balancer and register the target group Create a static route on the production VPC to route traffic that is directed to the overlay IP address to the ASCS instance.

A company's SAP solutions architect needs to design an architecture to deploy a highly available SAP S/4HANA application on AWS. The company requires the SAP NetWeaver ASAP ASCS components and the SAP HANA database components or the application to be highly available. The company will operate the SAP NetWeaver ASCS, SAP NetWeaver PAS, and SAP HANA database components on separate Amazon EC2 instances. Each EC2 instance will run the Red Hat Enterprise Linux operating system.

The company's AWS account has a VPC with a CIDR block that uses the 10.0.0.0/24 address block. The VPC contains two subnets. Each subnet is assigned to a different Availability Zone. The company has no other VPCs in this account, and the company has no other AWS accounts.

Which set of overlay IP addresses can the SAP solutions architect use to provide the required highly available architecture?

A. Two overlay IP addresses: 10.0.0.50 for SAP ASCS and 10.0.0.54 for SAP HANA

B. Two overlay IP addresses: 192.168.0.50 for SAP ASCS and 192.168.0.54 for SAP HANA

C. Three overlay IP addresses: 10.0.0.50 for SAP ASCS, 10.0.0.52 for SAP ERS, and 10.0.0.54 for SAP HANA

D. Three overlay IP addresses: 192.168.0.50 for SAP ASCS, 192.168.0.52 for SAP ERS, and 192.168.0.54 for SAP HANA

A company migrated its SAP environment to AWS 6 months ago. The landscape consists of a few thousand Amazon EC2 instances for production, development, quality, and sandbox environments. The company wants to minimize the operational cost of the landscape without affecting system performance and availability.

Which solutions will meet these requirements? (Choose two.)

A. Scale down the EC2 instance size for non-production environments.

B. Create an AWS Systems Manager document to automatically stop and start the SAP systems. Use Amazon CloudWatch to automate the scheduling of this task.

C. Review the billing data for the EC2 instances. Analyze the workload, and choose an EC2 Instance Savings Plan.

D. Create an AWS Systems Manager document to automatically stop and start the SAP systems and EC2 instances for non-production environments outside business hours. Use Amazon EventBridge to automate the scheduling of this task.

E. Create an AWS Systems Manager document to automatically stop and start the SAP systems and EC2 instances. Maintain the schedule in the Systems Manager document to automate this task.

A company's SAP solutions architect is configuring a network architecture for an SAP HANA multi-node environment. The company requires isolation of the logical network zones: client, internal, and storage. The database runs on X1 (memory optimized) Amazon EC2 instances and uses Amazon Elastic Block Store (Amazon EBS) volumes for persistent storage.

Which combination of actions will provide the required isolation? (Choose three.)

A. Attach an AWS Network Firewall policy for each zone to the subnet for the node cluster.

B. Attach a secondary elastic network interface to each instance for the internal communications between nodes.

C. Attach a secondary elastic network interface to each instance for the storage communications.

D. Configure a security group with rules that allow only TCP connections within the security group on the ports that are assigned for the internal network connections. Associate the security group with the appropriate elastic network interface on each instance.

E. Configure a security group with rules that allow only TCP connections with the external customer network on the ports that are assigned for the client connections. Associate the security group with the appropriate elastic network interface.

F. Configure a security group with rules that allow Non-Volatile Memory Express (NVMe) connections within the subnet range. Associate the security group with the appropriate elastic network interface on each instance.