NS0-192 Online Practice Questions and Answers

You order a FAS8200 cluster with 4 TB SATA drives. Before executing the cluster setup command, you notice that ADP is not being used.

In this scenario, which statement is correct?

A. Halt the nodes and configure ADP at the LOADER-X> prompt.

B. Complete the cluster setup and use OnCommand System Manager to configure ADP.

C. While executing the cluster setup command, reconfigure the disks to use ADP.

D. Halt the nodes, boot to the special boot menu, and configure ADP.

After you replace a network adapter card in a NetApp node, what should be done before you put the node back into production?

A. From the cluster::> prompt, use the sldiag utility for testing before rejoining the cluster.

B. From the LOADER> prompt, use the boot_diags command and use the sldiag utility for testing.

C. From the LOADER> prompt, use the boot_ontap command to boot into ONTAP and use the sldiag utility for testing.

D. From the cluster::> prompt, use the set diag command for testing before rejoining the cluster.

After replacing a failed disk, the disk does not appear as a spare on any node in the cluster.

What should be done to correct this problem?

A. Physically remove the disk and re-seat it firmly in the storage bay.

B. Physically remove and re-seat each IOM in the shelf, one at a time.

C. Assign ownership of the replaced disk to a node.

D. Add the disk into an aggregate on either node.

You need to non-disruptively remove a DS224C shelf from a 4-shelf stack.

Which three actions should be performed to accomplish this task? (Choose three.)

A. Ensure that an aggregate relocation has been performed.

B. Ensure that the HA pair is not in a takeover state.

C. Ensure that the stack is connected using multipath high availability.

D. Ensure that each node is in a takeover state when you remove the cables.

E. Ensure that no aggregates exist on the shelf.

You want to replicate all volumes of an SVM, including the SVM's configuration data, to another cluster on an hourly schedule.

Which action should you perform to accomplish this task?

A. Configure SVM disaster recovery between the two SVMs.

B. Configure SyncMirror between the two clusters.

C. Configure SnapMirror replication for the volumes with a relationship type of DP.

D. Configure SnapMirror replication for the volumes with a relationship type of XDP.

An administrator has created an SVM and would like to replicate it using SVM DR.

In this scenario, which two protocol configurations are replicated? (Choose two.)

A. CIFS

B. iSCSI

C. FC

D. NFS

You need to establish a volume SnapMirror relationship between two different clusters on your network. Which three elements are necessary for SnapMirror to work? (Choose three.)

A. volume peering

B. intercluster LIFs

C. cluster peering

D. SVM peering

E. cluster LIF

You need to restore a large number of files from a Snapshot copy and grant users read/write access to the restored data using CIFS. For comparison reasons, you must ensure that the currently active data in the volume is preserved.

Which restore method should you use to accomplish this task?

A. Use FlexClone to clone the volume, and specify the Snapshot copy from which to clone.

B. Use SnapRestore to restore the volume, and specify the Snapshot copy from which to restore.

C. Use NDMP to restore the data from the Snapshot copy back to the volume.

D. Grant users read/write access to the Snapshot copy in the snapshot folder of the CIFS share.

Click the Exhibit button.

You are using the SnapCenter Plug-in for Microsoft SQL Server to back up a Microsoft SQL Server. Backups and restores are functioning. However, restores for DB2 are slower than the other databases. The storage layout is shown in the exhibit. DB2 is significantly larger than other databases in the environment.

Referring to the exhibit, which two actions should be performed to decrease restore times for DB2? (Choose two.)

A. Move the DB2 data files to a dedicated LUN and volume.

B. Enable FlexClone technology for DB2.

C. Move the log directory to faster storage.

D. Move the DB2 transaction logs to a dedicated LUN and volume.

Click the Exhibit button.

You are creating a new LIF on a new SVM named "bravo-fs2". The cluster is being used in a multitenancy environment, and the bravo tenant has VLAN 105 assigned to it. You receive the error shown in the exhibit when you are creating the LIF. You have verified that the IP address is correct and the existing IP addresses that are already configured are also correct.

Referring to the exhibit, why is this error occurring?

A. Two NetApp LIFs cannot have the same IP address assigned.

B. Another device on VLAN 105 already has the IP address.

C. The network switch VLAN configuration is incorrect.

D. Using the same IP address on two LIFs requires different IPspaces.