NS0-180 Online Practice Questions and Answers

According to NetApp, which two scenarios are recommended for a RAID-DP aggregate in clustered Data ONTAP 8.3? (Choose two.)

A. three or more disks if it is a data aggregate

B. three or more disks if it is a root aggregate

C. two or more disks if it is a root aggregate

D. five or more disks if it is a data aggregate

Multiple customers want to access a cluster from different domains that may contain duplicate IP addresses.

In this situation, which feature should you use?

A. IPspaces

B. interface groups

C. VLAN

D. logical interfaces

You have completed the installation of a 4-node cluster. The customer did not purchase management switches and will not allow your laptop on the network.

In this situation, what are two valid procedures that will allow you to collect the Config Advisor output? (Choose two.)

A. Bring a switch that allows you to connect your laptop to all the switches and controllers.

B. Connect to a single controller in the cluster since it can run commands on every node.

C. Ask the customer to install and run Config Advisor on one of their PCs on the network.

D. Connect four USB serial cables to your laptop to allow you to connect to all four controllers.

You are asked to install a cluster that consists of two FAS8060 controllers and four DS2246 shelves. The customer wants two stacks of shelves (10-11 and 20-21).

According to NetApp, how many SAS cables are required to complete this installation with MPHA?

A. 10 SAS cables

B. 12 SAS cables

C. 8 SAS cables

D. 6 SAS cables

While testing storage failover, you receive an error message indicating that you have a disk inventory mismatch.

What is a reason for the error message?

A. unsupported disks

B. cabling problems

C. Flash Cache problems

D. unowned disks

Which technology allows NetApp to ship replacements for defective parts automatically?

A. SLDIAG

B. OnCommand System Manager

C. Call Home

D. AutoSupport

What network information is required to set up any Cisco switches attached to a clustered Data ONTAP system? (Choose two.)

A. All management ports configured for e0d or the service port (wrench icon) are required.

B. VLAN tags for each interface are required.

C. Host names and IP addresses for each of the controllers and configured switches are required.

D. The appropriate number and type of cables and cable connectors for your switches are required.

You are preparing to install a new 4-node cluster for your customer. They want to use NetApp CN1610 cluster switches that they previously purchased.

Which software must be downloaded to ensure that you are well prepared for this installation?

A. You must download CN1610 firmware and RCF files compatible with the clustered Data ONTAP version that your customer wants to use.

B. You must download the Cisco configuration files compatible with the clustered Data ONTAP version that your customer wants to use.

C. You must download ATTO Fibre Bridge firmware.

D. You must download the System Setup tool.

You are assigned to install two DS2246 shelves, three DS4243 shelves, and one DS4486 shelf. How many rack units (U space) should you account for in this rack layout?

A. 6U

B. 20U

C. 10U

D. 22U

You want to install a new clustered Data ONTAP 8.3 system. The customer wants to use open ports on interconnect switches from a different system with clustered Data ONTAP 8.2 because they are running out of space in their rack.

What should be considered in this scenario?

A. Only one cluster per switch pair is qualified and supported.

B. You can use all free network ports for the cluster interconnect.

C. You can only use dedicated ports for the clustered interconnect.

D. A maximum of two clusters per switch pair are qualified and supported, but you should use trunked ports.