MB-335 Online Practice Questions and Answers

Questions 4

You need to set up the correct production solution for the assembly area. Which solution should you implement?

A. Standard warehousing with Manufacturing execution

B. Standard warehousing for all transactions

C. Advanced warehousing for all transactions

D. Advanced warehousing with Manufacturing execution

Buy Now

Questions 5

You are a process engineer evaluating Lean vs. Discrete processing. You want to convert a Kanban item. The item has the following Lean setup:

The setup uses a Lean schedule group with a throughput ratio=2

The process activity tied to production flow has the following runtime activity times: time=3 min, per quantity=1

The work cell capacity has a model type of Throughput and an average throughput quantity of 60 per a capacity period of standard workday (8-hour day)

The throughput is 10 per hour

You need to set up a Discrete operation to mirror the item's production flow activity.

What should you do?

A. Create a route with a runtime =1, a process quantity =6, and the operation's hours/time =1

B. Create a route with a runtime =1, a process quantity =10, and the operation's hours/time =1

C. Create a route with a runtime =6, a process quantity =1, and the operation's hours/time =1

D. Create a route with a runtime =10, a process quantity =6, and the operation's hours/time =1

Buy Now

Questions 6

A vendor plans to supply replacements for a product that they manufactured.

The cost associated with manufacturing most components of the replacement product differ from costs associated with the original product.

You need to plan for the new cost of the item in determining the sales price.

Which costing version explosion mode should you use?

A. According to BOM line type

B. Multilevel

C. Single level

D. Make to Order

Buy Now

Questions 7

A company implements Dynamics 365 Supply Chain Management and configures the system to support process manufacturing.

The company manufactures pain-relieving lotions. Several of the primary ingredients are delivered at different concentrations depending on the ingredient and vendor. Ingredient A is the primary active ingredient In the lotion. Ingredients is

used as a compensating ingredient.

You need to ensure that the system is set up to support the manufacturing process.

Solution: Set up the batch attributes for a minimum value, a maximum value, and a target level for the filler ingredients.

Does the solution meet the goal?

A. Yes

B. No

Buy Now

Questions 8

You use the master planning module for Dynamics 365 Supply Chain Management.

Planned production orders have been created.

Several sales orders are canceled in response to concerns about recent online reviews of a product.

You need to enable the appropriate action message.

Which action message should you enable?

A. Increase

B. Decrease

C. Advance

D. Postpone

E. Derived actions

Buy Now

Questions 9

You need to configure production operations for the pine and orange scent solutions.

Which three actions should you perform? Each correct answer presents part of the solution.

A. Use a purchase agreement as a service agreement.

B. Configure a costing resource and requirement to point to a Vendor type resource.

C. Configure the inventory policy for the item model group to set the value of the Stocked product option to Yes.

D. Allocate subscontracted work in its own cost breakdown block.

E. Configure the BOM line to be of type Vendor and associate the corresponding vendor account.

Buy Now

Correct Answer: BCE

Subcontracting of route operations

To use subcontracting of route operations for production or batch orders, the service product that is used for the procurement of the service must be defined as a product of the Service type. Additionally, it must have an item model group that

has the Stocked product option under Inventory policy set to Yes. This option defines whether a product is accounted as inventory on product receipt (Stocked product = Yes), or whether the product is expensed on a profit and loss account

(Stocked product = No). Although this behavior might seem contradictory, it's based on the fact that only products that have this policy will create inventory transactions that can be used in cost control to calculate planned cost and determine

the actual cost when a production order is ended.

To be considered in planning and cost calculation, the service must be added to the BOM. The BOM line must be of the Vendor type, and it must be allocated to the route operation that the service is allocated to. This route operation must

have a costing resource and resource requirement that point to a resource of the Vendor type that connects the operation and the related service to the corresponding vendor account.

Note:

There are two methods for modeling subcontracting work for production operations. These methods differ in the way that the subcontracting process can be modeled, the way that semi-finished products are represented in the process, and

the way that cost control is managed.

Subcontracting of route operations in production orders or batch orders The service product must be a stocked product, and it must be part of the BOM. This method supports first in, first out (FIFO) or standard cost. Semi-finished products are represented by the service product in the process. Cost control allocates the costs that are associated with subcontracted work to the material costs.

Subcontracting of production flow activities in a lean production flow

Scenario: Liquid cleaning solutions:

No scent

Orange scent (subcontracted to a vendor named VendorA)

Pine scent (subcontracted to a vendor named VendorA)

You must set up production operations for sub-contracting of Pine scent and Orange scent solution to VendorA to ensure that a purchase order is automatically created based on estimation of a production order.

Reference:

https://learn.microsoft.com/en-us/dynamics365/supply-chain/production-control/manage-subcontract-work- production

Questions 10

A company manufactures high performance bicycles.

The bicycles come in several different preconfigured models. Customers can also purchase custom configurations. Several add-ons are dependent on other accessories in order to be installed. You need to set up the system to handle the

different product configurations.

What should you do?

A. Create an expression constraint.

B. Create a phantom BOM.

C. Create a co-product.

D. Create a batch version.

Buy Now

Questions 11

A company uses engineering change management in Dynamics 365 Supply Chain Management. The Product readiness checks feature is turned off.

An existing engineering product must be reconfigured for a new product readiness policy.

You need to change the product readiness policy.

Where should you make this change?