HPE0-S58 Online Practice Questions and Answers

DRAG DROP

Match each HPE server platform with optimal workload.

Select and Place:

HOTSPOT

An integrator has installed a new Synergy frame into a rack with two existing Synergy frames in a customer's environment.

Click where the integrator should verify that the cabling for the management ring was completed correctly.

Hot Area:

Refer to the exhibit.

An integrator needs to add an FCoE connection to the server profile, but the FCoE connection type is not available.

What is the likely cause of this issue?

A. FCoE capable interconnect modules are not installed in the Synergy frame

B. Defined FCoE network is not associated with a SAN or does not have VLAN Id defined

C. A FCoE connection is not available, as there is no LIG configured for FCoE connectivity

D. The FCoE connection has not been added as a Fibre Channel connection within a server profile

A Synergy integrator is unable to assign an HPE 3PAR Virtual Volume to a new server profile in HPE Composer. The Virtual Volume has been previously assigned to another profile. Which setting in HPE Composer is preventing the integrator from assigning the volume to the new profile?

A. private, in the volume properties

B. shared, in the volume properties

C. private, in the storage pool properties

D. shared, in the storage pool properties

A customer wants to add nodes to the existing ESXi cluster using the HPE OneView for vCenter Server. What must be done before this functionality can be used?

A. The cluster must be imported to HPE OneView

B. An additional VMkernel port must be created for OneView integration

C. All local datastores must be disconnected or removed from the other cluster nodes

D. At least one node of the cluster must be placed in the maintenance mode

A customer needs to create a VMware HA cluster. Which component is required for this installation?

A. VMkernel port for HA

B. vMotion configured

C. deduplication enabled

D. shared datastore

A customer complains about the database performance running on the HPE Synergy 480 compute node. To solve that problem, an integrator has to install the maximum memory in this compute node. What else does the integrator need to do to allow the SY480 Gen10 to see all the memory modules?

A. Add a second processor

B. Install the Synergy Premium Backplane option

C. Install NVDIMM memory

D. Install a Memory Expansion Kit

A customer connected a logical drive from 3PAR StoreServ array to the Windows Server 2016 as a data drive.

The customer complains that in the Disk Manager, they can see the same volume four times.

What can an integrator do to fix this issue?

A. Delete any three logical drives and leave one of them

B. Go to the SSMC and enable multipathing option for this volume

C. Create an NTFS partition on any logical drive to consolidate the logical drives

D. Install an MPIO component to hide redundant paths to the volume

Using a laptop, how can an integrator perform the initial setup on an HPE Synergy 12000 Frame?

A. Connect a CAT5 cable to the MGMT port of the top Frame Link Module, and connect to the HPE Synergy console with VNC to the address 306.025 port 5900.

B. Connect a CAT5 cable to the front panel module, use the HPE Synergy default IP address of 192.168.10.1, port 5900, and connect to the HPE Synergy console with a web browser.

C. Connect a CAT5 cable to the MGMT port of the top Frame Link Module, and connect to the HPE Synergy console with a web browser to the address 192.168.10.1, port 5900.

D. Connect a CAT5 cable to the front panel module, use the HPE Synergy default IP address of 192.168.10.1, port 5900, and connect to the HPE Synergy console with VNC.

A customer wants to boot Synergy compute nodes from external LUN located on HPE MSA 2050 SAN Storage. What should an integrator consider when implementing this configuration?

A. Using HPE Composer, only volumes up to 4TB can be created on the MSA2050

B. Additional integration license must be purchased for the MSA2050 and Synergy platforms

C. Automated zoning functionality cannot be used, as MSA2050 is not supported in HPE Composer

D. MSA2050 must be imported first to the HPE Composer before volume presentation can be done