HPE0-J50 Online Practice Questions and Answers

Click the menu option a storage integrator will use to install a new StoreOnce VSA solution.

Hot Area:

A storage integrator installed an HPE 3PAR StoreServ system.

For which default accounts will the storage integrator need to hand over changed passwords to the customer?

A. 3parcust. 3paradm

B. cpmaint, spmaint

C. root, 3paradm

D. root, console

A storage integrator has connected a new Windows Server 2012 host to a customer's fabric where five HPE 3PAR StoreServ arrays are already installed. The integrator plans to create a script to send the information about the new host to all HPE 3PAR arrays in an automated way.

Which Host Explorer command should be used?

A. tpdhostget status

B. hostagent set

C. tpdhostagent push

D. hostagent list

A customer finds that the performance of their application is not optimal. The customer's application stores data on an HPE 3PAR StoreServ Array to a volume within an FC tier. How should the storage integrator move the application data to a volume within an SSD tier?

A. Backup the data, delete the FC volume, create a new SSD volume, and restore the data to it.

B. Use the Dynamic Optimization feature in the HPE 3PAR StoreServ Management Console.

C. Use the System Reporter feature in the HPE 3PAR StoreServ Management Console.

D. Create an SSD volume, use the server OS to copy the data to the new volume, and delete the FC volume.

An integrator is validating a design for an HPE 3PAR StoreServ solution. The assessment document shows that there is structured cabling between the rack the array will be installed in and the racks with the SAN switches. The fiber segments between the racks are documented as being 50 micron OM2 and are terminated with SC connectors.

What needs to be considered when validating this design?

A. 3PAR arrays must be directly connected to SAN switches.

B. The SC connectors must be replaced by LC connectors.

C. OM2 Fiber cables are not supported for 8 Gbps.

D. Fiber segments cannot mix OM2 and OM4 cables.

A storage integrator has installed HPE OneView for vCenter to integrate HPE MSA 1040 management from a vSphere Web Client. Which typical configuration task is required after the installation of HPE OneView for vCenter?

A. license HPE OneView for VMware Storage Component

B. register HPE OneView for vCenter to Storage Management Utility

C. add HPE MSA Storage System to vCenter server

D. add vCenter server to HPE OneView for vCenter

Refer to the exhibit.

A storage integrator is planning to map an HPE StoreServ virtual volume to a server.

Which tool can be used to gather required information, such as WWNs of the server, for exporting the volume?

A. HPE 3PAR PowerShell cmdlets

B. HPE 3PAR Host Explorer

C. HPE 3PAR CLI

D. Multipath I/O parameters

An HPE StoreVirtual 3200 solution specifies 802.3ad (LACP) bonding is required for the network interfaces. What must be considered when implementing this solution?

A. Only one of the chosen network interfaces will actively pass traffic.

B. The network interfaces chosen may operate at the different speeds.

C. Additional switch configuration will be necessary.

D. The network interfaces chosen must be cabled to different switches.

Refer to the exhibit.

A storage integrator is deploying an HPE StoreOnce VSA.

Which command can be used to find available storage capacity before it can be added in the StoreOnce console?

A. hardware setup storage

B. hardware run setup

C. hardware discover storage

D. hardware discover disks

Refer to the exhibit.

A customer is complaining about slow performance for their HPE 3PAR StoreServ system.

Which CLI command can be used by the storage administrator to display the queue length of a VLUN attached to the server during the troubleshooting process?

A. perfvluns

B. statvirtvolmapping

C. show mappingsvirtvol

D. srstatvlun