HP0-J67 Online Practice Questions and Answers

You present an HP 3PAR StoreServ concept to a customer. The customer wants to know how your design solves their technical and business needs and reduces their TCO .Map the HP 3PAR StoreServ solution component to the correct TCO element.

Select and Place:

Select and Place:

A customer has an environment that spans two data centers in a campus environment. The primary storage is HP 3PAR 10400, and data is replicated between sites with an RPO of zero.

Recent bad weather has caused flooding near the customer site and the customer is questioning whether they have adequate protection. You suggest creating a data center at a remote location and actively replicating the data to it. The

customer is concerned that the remote link to the third site will have insufficient bandwidth and will create a local replication bottleneck.

Which statement addresses the customer concerns?

A. Synchronous Long Distance will schedule data replication outside high latency periods autonomic array

B. Data is transmitted in a continuous stream with write order being handled by the target array.

C. Remote Copy uses multiple connections over the same link from multiple volumes.

D. Over provisioning of the remote link will ensure enough bandwidth is always available for replication.

You are discussing cost reduction quality management, and business growth with a client. According to industry best practices, which CxO are you meeting with?

A. CFO

B. CIO

C. COO

D. CEO

You propose a solution to a VMware customer. The solution consists of two HP 3PAR StoreServ Storage systems, one for each data center that the customer currently operates. The customer requires that the solution be capable of making a transparent failover between the primary and secondary data center even in the case of a complete data center failure.

Which HP 3PAR licenses should be included in the proposal? (Select two.)

A. Peer Persistence

B. Remote Optimization

C. Remote Copy

D. Peer Motion

E. Virtual Copy

Refer to the exhibit:

How does the cabling scheme ensure high availability for Virtual Library 2?

A. The Virtual Tape Libraries are spread across both Fibre Channel ports and offer load balancing across the SAN.

B. The medium changer and drives are connected redundantly to the Fibre Channel ports of the system and the SAN.

C. The drives are presented through both Fibre Channel ports of the HP StoreOnce Backup System.

D. The medium changer is connected redundantly, and the drives, by default, are connected 50% to each port.

Refer to the exhibit.

A customer reports performance issues in their newly-installed storage environment, which you designed. A storage performance report shows that the storage system is not over utilized. What should you recommend to solve the problem?

A. Add additional ISLs between the data centers.

B. Add more host ports to the attached server systems.

C. Add additional Fibre Channel cards in the storage system.

D. Trunk the existing ISLs between the data centers.

A customer has multiple eight-node SQL clusters that are currently connected to three HP EVA 8400 Storage systems. The customer has I/O latency problems on the servers and sees high queue depths on the EVA ports. What should you recommend to solve this problem?

A. HP EVA P6000, which has higher queue depths

B. HP StoreVirtual multi-node with Fibre Channel support

C. HP Storevirtual with iSCSI to eliminate queue depths

D. HP 3PAR StoreServ 10000 with 32 host ports

You are reviewing a colleague's design for a new storage environment. The solution consists of two HP 3PAR StoreServ arrays. The colleague also proposes an HP Multi-protocol Router Blade for the B-Series to extend the fabric.

Which customer requirements should lead you to choose an HP MPX200 Multi-protocol Router as an alternative? (Select two.)

A. Need for up to 10Gbs replication bandwidth

B. Need for FCoE support

C. Need for online migrations

D. Need for fabric stability

E. Need to prioritize array replication over WANs, over less critical traffic

You are sizing a solution based on performance requirements.

How do you calculate the number of front-end I/ Os versus back-end I/O when doing single writes? (Select three.)

A. On RAID 1, a single front-end I/0 results in 1 back-end I/O

B. On RAID 5, a single front-end I/O results in 4 back-end I/Os

C. On RAID 5, a singe front-end I/0 results in 3 back-end I/Os

D. On RAID 6, a single front-end I/O results in 4 back-end I/Os

E. On RAID 6, a single front-end I/O results in 6 back-end l/Os

F. On RAID 1, a single front-end I/O results in 2 back-end I/Os

Refer to the exhibit.

A customer reports poor application performance on their OLTP database, which is on an existing two-node HP P4500 Virtualization provides you with the chart in the exhibit. Which conclusion can you draw from this graph?

A. Maximum acceptable response time is reached during business hours.

B. Maximum acceptable response time is reached during backup.

C. Optimal response time is not reached during the whole measure period.

D. Optimal response time is reached during business hours.