E20-375 Online Practice Questions and Answers

What is the maximum supported storage capacity, per license, for an EMC RecoverPoint/EX environment?

A. 100 terabytes

B. 2 petabytes

C. 4 petabytes

D. 10 petabytes

Which Ethernet interface on an RPA is used for replication to the remote clusters?

A. eth0

B. eth1

C. eth2

D. eth3

What is the minimum number of RecoverPoint Clusters required to use the MetroPoint feature?

A. 1

B. 2

C. 3

D. 5

An existing RecoverPoint/CL environment consists of one cluster at the main office and two off- site DR clusters. You have been asked to expand the environment to the maximum number of DR sites using RecoverPoint.

How many additional clusters could be added to this RecoverPoint Environment?

A. 2

B. 4

C. 5

D. 8

What is a characteristic of a full sweep?

A. Initialization is done on all volumes in a Consistency Group.

B. Initialization is done on specific volumes in a Consistency Group.

C. A full sweep occurs when a user enables a disabled volume.

D. A full sweep occurs when a user enables a disabled splitter.

A storage administrator is installing the VSI RecoverPoint Management plug-in, but the installation fails. What could be causing this?

A. vSphere client not installed

B. vSphere client not running during the installation

C. RPAs used were all virtual

D. At least one virtual RPA present

When is the Open Replicator RecoverPoint session created for each replica volume in the Consistency Group (CG)?

A. CG is put into Image Access mode

B. CG is created

C. CG is enabled

D. CG is taken out of Image Access mode

A customer has a four-node RecoverPoint cluster using a VNX array. All LUNs are replicating and failover has been tested. The customer would like to integrate RecoverPoint and Unisphere. However, they are unable to manage the cluster through Unisphere.

What should the customer do to correct the issue?

A. Convert to RecoverPoint/SE using Deployment Manager

B. Reinstall the RecoverPoint splitter enabler on the VNX

C. Rescan the VNX splitters in the management application

D. Reinstall the RecoverPoint/SE license file

During deployment of a vRPA OVF template a temporary IP address must be set to be used by Deployment Manager in later steps.

Which IP address allocation policy should be selected?

A. Fixed

B. Transient

C. DHCP

D. No manual selection needed. The OVF template deployment automatically selects the correct IP allocation policy.

During Consistency Group initialization, the host application experiences a performance impact. What can be used to reduce the negative impact on performance?

A. I/O throttling

B. Detect bottlenecks

C. FC diagnostics

D. IP diagnostics