AX0-100 Online Practice Questions and Answers

When initiating a surveillance project with a customer, which of the following should be considered first?

A. Understand which camera models to use

B. Understand the customer's technical knowledge

C. Understand the customer's goals and requirements

D. Understand the legal aspects for the installation

With Axis Coverage Shapes, the designer can

A. See the effect of furniture or other objects blocking field of view.

B. View how varying lighting conditions affect the image.

C. Create a 3D view of the scene the camera will capture.

D. Determine at what distance a person can be identified.

After an installer sets up a motion detection window they then zoom out the camera. How will this affect the camera's ability to detect motion if no settings are changed?

A. More pixels are needed to change to trigger motion detection

B. Less pixels are needed to change to trigger motion detection

C. More movement needed to change to trigger motion detection D. Less movement needed to change to trigger motion detection

Image flickering is caused by

A. IR light

B. White light

C. Lack of light

D. Fluorescent light

Which statement is true for broadcast network traffic?

A. Broadcast is designed to enable optimized video transmission, since it tolerates network dropouts

B. Broadcast is not practical for network video transmission, since packets are transmitted to every device on the network

C. Broadcast is a method for sending video to many recipients over the internet even though their bandwidths vary

D. Broadcast data packet length is longer than normal Ethernet packets, to accommodate a full video frame

Audio detection can be used

A. Only with cameras with built in microphone.

B. In all Axis cameras but an extra intelligent video (IV) module is necessary.

C. Only in quiet areas.

D. For detecting a change in decibel levels.

A varifocal lens

A. Makes it possible to adjust the focal length like a zoom lens, but requires refocusing after adjusting the focal length.

B. Allows the depth of field to be adjusted, making it possible to blur out the background for privacy protection or reducing distraction.

C. Can rapidly change focus between a set of predefined positions, making it easy to move between different points of interest in the scene.

D. Is a lens where the focus can be adjusted, as opposed to a fixed focus lens, making it possible to focus on objects close to the camera.

Which network features are usually combined to prevent access to the surveillance network?

A. IEEE 802.3ad link aggregation and HTTPS encryption

B. IP subnets and VLANs

C. Router port forwarding and IP subnets

D. Router port forwarding and VLANs

For which purposes would a thermal network camera be a viable alternative to a standard network camera? (Choose three)

A. Identification of a person

B. Detection at daylight

C. Detection at night

D. Detection in smoke and light fog conditions

E. License Plate Recognition

When installing a network camera with PoE, which best practices should be taken into consideration? (Choose two)

A. The camera has the correct software version

B. The camera is configured for continuous recording

C. The correct PoE standards are being used

D. The camera has multiple video streams in H.264

E. The correct cabling standards are being used