7303 Online Practice Questions and Answers

A technician is installing an Avaya CallPilot with the NTRH40CA MBP96 CAT5 board and two NTRB18DA Mgate cards. When cabling the NTRB18DA Mgate cards in a Communication Server 1000S Media Gateway, which statement describes the cabling configuration that is the most valid?

A. Attach the customersupplied RJ-45cables to thefaceof the Mgate cards and then to the MBP96 card.

B. Attach the customer supplied RJ-45 cables to the backplane of the Media Gateway or MediaGateway expansion cabinet and then to the MBP96 card.

C. AttachNTDU0609 cables to the face of the Mgate cards and route them outside the Media Gateway. Then couple the customer supplied RJ-45 cables from the NTDU0609 to the MPB96 cards.

D. Attach the NTDU0609 cables to the face of the Mgate cards and take them outside the Media ay lo a customer supplied Ethernet hub. Attach RJ-45 cable from the hub to the MPB96cards.

When installing Avaya CallPilot Reporter, what is a valid installation option?

A. Client PC

B. Avaya CallPilot server

C. Administrator PC

D. Customer provided Web server

A company is running Communication Server l000E RIs. 6.0 software with a 1005r Avaya CallPilot server installed at their headquarters in London. The Avaya CallPilot installation has been completed and the CS1000E has been correctly configured.

What will happen to a call if it is placed to CDN 3300?

A. The call will be routed to Avaya CallPilot for treatment.

B. The call will follow the default DN as configured on the CDN.

C. The callerwill receive busy or overflow

D. The caller willberedirected to the attendant/switchboard.

A technician is installing a now Avaya CallPilot Server, and has programmed the new ACD Queue and virtual agents for the DS0 connectivity. In the Configuration Wizard, in which three fields is the information entered?

A. TN, class ID, number of TNs to be added

B. numberofTNs to be added, ACD Queue number,Key 0

C. TNs, ACD Queue number, Key 0

D. TN, Key 0, Key 1

A technician is upgrading a 2011 to Avaya CallPilot RIs. 5.0. The image installs but the system hangs when booting into Windows 2003. Which two items should be checked? (Choose two.)

A. The BIOS has been upgraded to 6.0.3.

B. Thekeyboard and mouse are plugged in correctly.

C. The external CD-ROM and Tape drive are connected.

D. The BIOS option forOperating System type is set to 'other'.

A technician is preparing to set up and install an Avaya CallPilot RIs.5.0 system. Which two rules that apply to grounding requirements? (Choose two.)

A. All equipment grounds must use single-point ground topology.

B. Any ground in the building is acceptable.

C. The grounds for all equipment must be alt ached to the building steel.

D. The DC resistance between the equipment and building grounds must very close to zero.

A technician is preparing to set up, install, and configure an Avaya CallPilot RIs. 5.0 system. Which three guidelines should be followed whenever handling switch and server components? (Choose three.)

A. Use electrostaticdischarge precautions.

B. Hard drives needspecial handling.

C. Use firm and steady force to seal printed circuit boards.

D. Handle printed Circuit boards by the backplane edge connector.

The Avaya CallPilot 600r servers are standalone systems that interface with the Meridian 1 and Communication Server 1000 PBX switches for multimedia connectivity. Which hardware component is used to complete the physical connection from the MPB96E card in the server and the MGate card installed in the switch?

A. CT Bus cable

B. Serial modern

C. CAT5Ethernet cable

D. NTRH2014 triple DS30X cable

A company has decided to install an Avaya CallPilot RIs. 5.0 system to supply them with multimedia messaging applications at their offices in London. A technician has successfully installed and configured both the Avaya CallPilot and Communication Server 1000E systems. How is the successful installation of the language prompts verified?

A. Log into the AvayaCallPilotdesktop and verify the language files are installedin the correct location.

B. Launch the AvayaCallPilotsystem monitor and verify the installed languages.

C. Dial the voicemail CDN and verify that AvayaCallPilotanswers with the correct language.

D. Reinstall the correctlanguageprompts.

A customer has a large sales force who wants to access their email accounts through either the My CallPilot Web page or the Email-by-Phone feature. What is the first stop for setting this up?

A. Configure the mailbox link from MyCallPilot.

B. Configureemail-by-phone from MyCallPilot.

C. Configureexternal email servers in AvayaCallPilotManager.

D. Enable SSLfrom Internet Mail Client in Avaya CallPilot Manager.