6103 Online Practice Questions and Answers

A customer is mirroring multiple ports to a single monitor port.

What happens if the mirrored traffic exceeds the bandwidth of the monitor port?

A. The traffic will be buffered until there is available bandwidth.

B. The excess traffic will be dropped randomly.

C. The excess traffic will be dropped based upon the mirror priority of the ingress port.

D. The excess traffic will be dropped based upon the port priority of the ingress port.

A customer is expressing concern about reliability for their single uplink connections to the wiring closet. The switches in the wiring closet support Distributed Multi-Link Trunking (DMLT).

What can be done so the Virtual Services Platform (VSP) 9000 can eliminate a single point of failure for the lowest cost?

A. Add a second switch fabric module.

B. Duplicate the trunk elements in software.

C. Duplicate the trunks across separate modules using DMLT.

D. Configure multiple VSP 9000 switches using Split Multi-Link Trunking (SMLT).

For maximum cooling, how many cooling modules does a Virtual Services Platform (VSP) 9000 chassis need?

A. 2 inserted from the front

B. 2 inserted from the back

C. 2 inserted from the front and 4 from the back

D. 2 inserted from the front and 2 from the back

A company has a virtualized computing environment, and their VSP 9000 can be configured so that the ports are considered "lossless" in their redundant network design. Which two traffic types are supported on a "lossless" port? (Choose two.)

A. Multicast

B. UDP traffic

C. ISIS

D. TCP traffic

The attempt to manage an Ethernet Routing Switch (ERS) 8000 using a VRRP address was unsuccessful. What is causing this problem?

A. The virtual router identifier is 0.

B. The datacenter interface is set as a critical IP interface.

C. A real IP address is required for management access not a VRRP address.

D. The incorrect MAC offset is configured for the VRRP address.

Given the following error message:

Power Supply Down(PsID=1,OperStatus=4)

What does the error message mean regarding the power supply?

A. It has failed.

B. It is installed,

C. It is intermittent.

D. It is missing.

Which ACLI command is used to display SMLT port configuration?

A. show port smlt {fastethernet|gigabitethernet|mlt|pos}

B. show mlt {fastethernet|gigabitethernet|mlt|pos}

C. show smlt {fastethernet|gigabitethernet|mlt|pos}

D. show port info mlt {fastethernet|gigabitethernet|mlt|pos}

On the VSP 9000, there are a maximum of 256 VRRP instances per VRF. What is the maximum number of instances that are allowed on the system?

A. 256

B. 512

C. 768

D. 1024

A customer is concerned about the security of their network. They need to understand the OSPF authentication options when accepting route updates in OSPF. Currently, their Virtual Services Platform (VSP) 9000 is configured to require no authentication when receiving the OSPF updates.

Which two supported authentication types would provide security on the VSP 9000 for OSPF updates? (Choose two.)

A. MD5

B. 3DES

C. RADIUS

D. Simple Password

Given the following command:

VSP-9012:1S show khi performance

Which Key Health Indicator is only valid for the CP modules?

A. CPU

B. buffer-pool

C. error-count

D. process

E. memory