5V0-31.20 Online Practice Questions and Answers

An architect is tasked with designing a new VMware Cloud Foundation environment. The company will purchase vSAN Ready Nodes for the management cluster but wants to make use of existing investments where possible, including a significant investment made recently in an all-flash storage array and 16GB FC fabric. The design must include this array wherever possible.

The company wishes to reuse existing ToR switching that will provide four 10GPs Ethernet connection to each host and one 1Gbps out of band connection. The network will be a standard spine and leaf topology with no layer-2 shared between racks of infrastructure. The ToR switches are each connected to 4 spine switches, with one 10Gbps connection. The clusters must be spread across at-least four racks to ensure maximum resiliency.

Which two constraints impact this design? (Choose two )

A. The use of an existing storage array.

B. VMFS does not support FC SAN with VMware Cloud Foundation

C. More than one availability design is needed.

D. The management domain must be contained within one rack.

E. A spine and leaf topology is used.

An administrator is required to deploy a new workloaddomain for a new business unit that must use its own NSX-I instance.

Which two Components will be deployed in the management domain during the workload domain creation? (Choose two.)

A. NSX-T Manager

B. Standalone Platform Services Controller

C. vCenter Server

D. NSX-T Edge node

E. Additional SDDC Manager

Which two components are included in the NSX-T upgrade process within VMware Cloud Foundation? (Choose two.)

A. Virtual Distributed Switch (vDS)

B. NSX-T Upgrade Coordinator service

C. NSX-T Controllers

D. NSX-T VIBs installed on ESXi hosts

E. VMware vCenter Server

Which step should be followed to restore SDDC Manager using the OVF tool?

A. Retrieve the DNS name or IP address of a host m the management Domain

B. Use the host s DNS name in the host password_vault-json, and this will display the root password

C. Install the OVF Tool on a system in the VI Workload domain.

D. Move the SDDC Manager VM into the VI Workload Resource Pool.

Which disk configuration is supported by VMware Cloud Builder and can be used for VMware vSAN in VMware Cloud foundation environment?

A. Two 600 GB HDD disks and four 2 TB SSD disks per server

B. Two 60X5 GB NVMe disks and four 2 TB SSD disks per server

C. Two 600 GB NVMe disks and five 2 TB SSD disks per server

D. Two 600 GB SSD disks and five 2 TB SSD disks per server

Which two components are required to support the initial bring-up of an automated VMware Cloud Foundation 4 x deployment? (Choose two)

A. VMware vRealize Suite Lifecycle Manager

B. VMware vSphere Security Configuration Guide

C. Deployment Parameter Workbook

D. VMware Cloud Builder

E. VMware SDDC Manager

An administrator did not deploy and configure Application Virtual Networks (AVN) during the initial VMware Cloud Foundation bring-up process. Which statement is correct?

A. AVN disablement is not possible during the VMware Cloud Foundation bring up process

B. Cloud Foundation bring-up will fail since AVN is required to property configure Management Domain.

C. AVN deployment is disabled by default and must be enabled right after the VMware Cloud Foundation bring up process

D. vReafize Suite components must be deployed to VLAN-backed distributed port group.

An architect has been tasked with designing a stretched workload domain between two sites in an active configuration due to number of recent failures in the company's infrastructure.

A. vSAN Witness Appliance can be deployed in VMware Cloud on AWS

B. The witness appliance should be running different version of fc:SXi as the ESXi hosts in the stretched cluster.

C. Static routes on the vSAN Witness host must be configured to enable network communication for the vSAN kernel traffic.

D. The management domain cluster must be stretched before stretching a cluster in a VI workload domain.

E. First cluster only in every VI workload domain can be stretched.

F. The vSAN Witness Appliance must be available on the same broadcast domain

An Architect is commission hosts with a Multi-NIC configuration where Management and vMotion traffic are assignto a vSphere Distributed Switch with 2 uplinks.

What is one advantage to using VLAN-banked traffic to the physical switches from the vSPhere Distributed Switch?

A. Layer 2 hashed-based Equal Cost Muto-Pathing (ECMP) out of hypervisor

B. Bandwidth in the rack is optimized (no inter-switch-link)

C. Two physical NICs of the hypervisor are actively used

D. More complex to implement

Which sizing tool is available for calculating management domain storagerequirements?

A. VMware Configuration Maximums

B. Virtualization Assessment Package

C. VMware Compatibility Guide

D. vSAN ReadyNode Sizer