350-801 Online Practice Questions and Answers

Which configuration on Cisco Unified Communications Manager is required for SIP MWI to work?

A. The line partition must be inside the inbound CSS assigned to the CUC SIP trunk.

B. The line partition must be inside the rerouting CSS assigned to the Cisco Unity Connection SIP trunk.

C. Set the "Enable message waiting indicator" on the part group.

D. Assign a MWI extension on the mailbox.

How is Video Call Traffic Class defined on Cisco Unified CM for Enhanced Location CAC bandwidth deductions?

A. On each device's configuration page

B. On Device Profile page

C. On SIP Profile configuration page

D. On Location configuration page

E. On each device or Device Pool's configuration page

What happens to voice packets from a Cisco 8845 IP phone in the QoS trust boundary?

A. The voice packets are not trusted, and the access layer switch reclassifies the packets.

B. The voice packets are classified by the phone, and the classification is accepted.

C. The phone and access layer switch negotiate the classification of packets.

D. Cisco UCM determines how the voice packets are classified.

Which type of input is required when configuring a third-party SIP phone?

A. digest user

B. serial number

C. manufacturer

D. authorization code

Refer to exhibit.

A company recently deployed CISCO Jabber Users log in to Jabber by using their email address in a domain named company com. The users report that they cannot register their telephony services when working from unless they use a VPN. An engineer runs DNS lookup tool in Cisco Expressway-C to troubleshoot tie

What IS me cause of the issue?

A. The company com domain must be resolved only in Expressway-E

B. There is a missing SRV record for the company.com domain.

C. The TTL value for the company.com is too short.

D. There must be only response for the company.com domain

What dialed number match this cisco UCM route pattern? 1[23]XX

A. 1200 through 1399 only

B. 1230 through 1239 only

C. 12300 through 12399 only

D. 1200 through 1300 only

What are two differences between media flow-around and media flow-through on cisco unified Border element? (Choose two.)

A. When using media flow-through, the call signaling and media are passed through the Cisco Unified Border Element

B. When using media flow-through, the call signaling goes through the Cisco Unified Border Element, but media is not passed through it

C. When using media flow-around. the call signaling goes through the Cisco Unified Border Element, but media is not passed through it

D. When using media flow-around, both call signaling and media do not go through the Cisco Unified Border Element

E. When using media flow-through, call signaling goes through the Cisco Unified Border Element but media does not

How does WRED prevent congestion?

A. It marks which packets to drop randomly.

B. It drops packets selectively based on the IP precedence value.

C. It marks which packets to drop based on how much traffic the client sent.

D. It drops packets that have a higher DSCP value last.

What does Cisco Jabber require before SIP OAuth mode can be enabled?

A. client Locally Significant Certificate

B. activation code

C. JSON Web Token

D. self-contained token

What is the purpose of a Workspace in Cisco Webex Control Hub?

A. to assign devices to users

B. to add or manage devices in an organization

C. to generate detailed reports about room usage

D. to add services to shared devices in a common area