300-430 Online Practice Questions and Answers

Refer to the exhibit.

A network administrator deploys the DHCP profiler service in two ISE servers: 10.3.10.101 and 10.3.10.102. All BYOD devices connecting to WLAN on VLAN63 have been incorrectly profiled and are assigned as unknown profiled endpoints. Which action efficiently rectifies the issue according to Cisco recommendations?

A. Nothing needed to be added on the Cisco WLC or VLAN interface. The ISE configuration must be fixed.

B. Disable DHCP proxy on the Cisco WLC.

C. Disable DHCP proxy on the Cisco WLC and run the ip helper-address command under the VLAN interface to point to DHCP and the two ISE servers.

D. Keep DHCP proxy enabled on the Cisco WLC and define helper-address under the VLAN interface to point to the two ISE servers.

Refer to the exhibit.

An engineer tries to manage the rogues on the Cisco WLC. Based on the configuration, which AP is marked as malicious by the controller?

A. rogue AP with SSID admin seen for 4000 seconds and heard at -70dBm

B. rogue AP with SSID admin seen for 3000 seconds and heard at -60dBm

C. rogue AP with SSID admin seen for 4000 seconds and heard at -60dBm

D. rogue AP with SSID admin seen for 3000 seconds and heard at -70dBm

What are two considerations when deploying a Cisco Hyperlocation? (Choose two.)

A. NTP configuration is available, but not recommended.

B. The Cisco Hyperlocation feature must be enabled only on the wireless LAN controller.

C. After enabling Cisco Hyperlocation on Cisco CMX, the APs and the wireless LAN controller must be restarted.

D. The Cisco Hyperlocation feature must be enabled on the wireless LAN controller and Cisco CMX.

E. If the Cisco CMX server is a VM, a high-end VM is needed for Cisco Hyperlocation deployments.

A wireless network engineer must present a list of all rogue APs with a high severity score to senior management. Which report must be created in Cisco Prime Infrastructure to provide this information?

A. Rogue AP Count Summary

B. New Rogue APs

C. Rogue AP Events

D. Rogue APs

Refer to the exhibit.

An engineer must restrict some subnets to have access to the WLC. When the CPU ACL function is enabled, no ACLs in the drop-down list are seen. What is the cause of the problem?

A. The ACL does not have a rule that is specified to the Management interface.

B. No ACLs have been created under the Access Control List tab.

C. When the ACL is created, it must be specified that it is a CPU ACL.

D. This configuration must be performed through the CLI and not though the web GUI.

A network engineer created a new wireless network that will be used for guest access. The corporate network must utilize all rates. The guest network must use only lower rates instead of 802.11n data rates. To what must the WMM policy of the WLAN be set to accomplish this task?

A. required

B. allowed

C. disabled

D. mandatory

An engineer is in the process of implementing Fastiane on a wireless network with a Mobility Express AP installed and Apple end-user devices. Due to a security concern, the IT department has updated all the iPads to version 14.5.423551943. Which QoS profile must the engineer configure on the user WLAN?

A. Platinum

B. Best Effort

C. Bronze

D. Silver

An engineer is configuring location services with a Cisco CMX 10.6.2 solution. The engineer must strengthen interferer filtering so that Cisco CMX is protected from bursts of short-lived interferes. Which two interferer-filtering parameters must be configured to meet the requirement? (Choose two.)

A. Intensity Cutoff

B. Severity Cutoff

C. Duty Cycle Cutoff

D. RSSI Maximum

E. Utilization Maximum

An engineer deploys APs in autonomous mode to provide corporate and guest access in several retail locations. Remote authentication with IEEE 802.1X is configured to ensure a secure wireless connection for corporate users. Which component must be configured as the authenticator?

A. RADIUS server

B. authentication server

C. APs

D. supplicant

The IT department creates a video containing instructions for employees who have just joined the company. Newcomers need to join the wireless network named NEW4501999110. The WLAN name will be changed daily by IT support. Only new employees must receive the video over wireless multicast. What allows this feature?

A. WMF

B. WMM

C. TPC

D. DCA